Water Heaters


 

Hot Water Systems


Stationary or Mobile | Basic to Turnkey

Low or High Volume? No Problem! Concrete Producers can rely on Pearson Systems for your hot water needs. Whether you have a precast plant doing smaller volumes or have dual central mix plants with high output, or anything in between. We have units for 100 yards to 5,000 yards+ per 8 hour production day.



Advantages of Pearson Water Heating Systems:

  1. Simple, efficient, rugged, reliable, and designed specifically for concrete plants
  2. Dozens of configurations can be custom built for your specific water heating demands and plant layout: seven different burner sizes, U.L.-approved burner operates on #2 fuel oil, natural gas, propane or combination of gas and oil, and high volume multi-burner units are available
  3. Complete turnkey stationary or portable systems available. Heater, tank, chiller and pumps all on one platform for ease of insulation and operation
  4. Sleek and simple design with few moving parts for greater reliability, and virtually maintenance free
  5. Save money: Built in insulated storage tank means there is no need to purchase an extra insulated recirculation tank for heated water. For the off season, units are designed for a chiller add-on or can be just used as a surge tank
  6. Works in hard well water or normal city water conditions
  7. No costly clogged coils or packing medium to replace
  8. No acid or chemical cleaning needed
  9. No need to pre-treat feed water
  10. No boiler room or boiler inspection required
  11. No gas ignition required with oil operation
  12. Digital temperature control can be remotely located
    13.

Exclusive on all Pearson heaters...The Pearson Power Flame Burner. Low fire with smooth lightoff/pulsation-free operation.


These patented burners feature:

  1. Solid state timer controls for low fire start to high fire operation
  2. Factory-wired burner
  3. Mounted Control Panel
  4. Patented flame retention head design
  5. Flange mounted
  6. All burners pre-tested
  7. Electric ignition standard
  8. Economically priced
    9.


PEARSON'S STANDARD DIRECT-FIRED WATER HEATERS
Operating Capacities

Model

 Min. Makeup Water
GPM/Flow Rate		 Hourly Recovery Rate
 Gals/100° Rise		 Available Gal.
1st Hr/100° Rise		 Total Usable Gal.
8 Hr./100° Rise
P-3-2W

4.7

 283 3,282 5,256
P-5-3W

7.0

 423 5,423 8,384
P-5-6W

14.1

 846 5,846 11,768
P-5-10W

23.5

 1,410 6,410 16,280
P-8-6W 14.1 846 8,846 14,768
P-8-10W 23.5 1,410 9,410 19,280
P-10-6W 14.1 846 10,846 16,768
P-10-10W 23.5 1,410 11,410 21,280
P-10-15W 35.5 2,115 12,115 26,920
P-10-20W 47.0 2,820 12,820 32,560
P-10-25W 59.0 3,540 13,540 38,320
P-15-10W 23.5 1,410 16,410 26,280
P-15-15W 35.5 2,115 17,115 31,920
P-15-20W 47.0 2,820 17,820 37,560
P-15-25W 59.0 3,540 18,540 43,320
P-20-10W 23.5 1,410 21,410 31,280
P-20-15W 35.5 2,115 22,115 36,920
P-20-20W 47.0 2,820 22,820 42,560
P-20-25W 59.0 3,540 23,540 48,320
P-25-15W 35.5 2,115 27,115 41,920
P-25-20W 47.0 2,820 27,820 47,560
P-25-25W 59.0 3,540 28,540 53,320
P-30-20W 47.0 2,820 32,820 52,569
P-30-25W 59.0 3,540 35,540 58,320
P-15-2-20W 94.0 5,640 20,640 60,120
P-15-2-25W 118.0 7,080 22,080 71,640
P-20-2-20W 94.0 5,640 25,640 65,120
P-20-2-25W 118.0 7,080 27,080 76,640
P-25-2-20W 94.0 5,640 30,640 70,120
P-25-2-25W 118.0 7,080 32,080 81,640
P-30-2-20W 94.0 5,640 35,640 75,120
P-30-2-25W 118.0 7,080 37,080 86,640

Note: Multiple burners available in a single tank. Volumes may vary. Custom sizes available.

Contact your Pearson Area Dealer or call our main office at 410.770.4617 to help you size which system is right for you.

 


29526 Canvasback Drive, Easton, MD 21601 | Phone 410.770.4617 | Fax 410.770.4619